StickC-Plus2 with Watch Accessories
Description
M5StickC Plus2 with Watch Accessories is a watch kit that includes an M5StickC Plus2, a wristband, a LEGO-compatible adapter, and a wall-mounting accessory. In addition to displaying time, it can also be used for applications such as sports activity monitoring and smart home control. When combined with the M5Stack HAT hardware ecosystem, it offers even more possibilities for smart wearable devices.
There is no doubt about the powerful capabilities of the M5StickC Plus2. As the second generation of M5StickC Plust, M5StickC Plus2 is equipped with a 240*135 color LCD screen, ESP32-PICO-V3-02 chip, MPU6886 6-axis IMU, SPM1423 digital microphone, BM8563 RTC chip, and IR emitter.
The HY2.0-4P interface at the bottom of the M5StickC Plus2 allows for connection to M5Stack's sensor series products, enabling customization of various functions. The 8P@2.54mm expansion interface on the top can be directly connected with M5Stack HAT series products, providing users with more development possibilities.
Wake up can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, the hold(G4) pin needs to be set to a high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again.
Power off:
When no USB external power supply is available, press BUTTON C for more than 6 seconds. Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off. When the USB is connected, press the "BUTTON C" button for more than 6 seconds to turn off the screen and enter the hibernation state, but not power off.
Tutorial
Features
- Customization Supports custom display
- 200mAh battery
- Light and portable
Includes
- 1x M5StickC PLUS2
- 1x LEGO adapter
- 1x Wall/1515
- 1x Watch band
- 1x Type-C USB(50cm)
Applications
- Smart Watch
Specifications
| Resources | Parameters |
|---|---|
| ESP32 | ESP32-PICO-V3-02 240MHz dual core,support wifi,2 MB SPI PSRAM,8 MB SPI flash |
| PSRAM | 2 MB PSRAM |
| Flash | 8 MB flash |
| Power Input | 5V @ 500mA |
| Port | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| LCD screen | 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2 |
| Button | Custom button x 3 |
| Power indicator LED | GREEN LED(non-programmable) |
| MEMS | MPU6886 |
| Buzzer | built-in buzzer |
| MIC | SPM1423 |
| RTC | BM8563 |
| Battery | 200mAh @ 3.7V |
| Antenna | 2.4G 3D Antenna |
| PIN port | G0, G25/G36, G26, G32, G33 |
| Operating Temperature | 0°C to 40°C |
| Strap size and weight | 230*22*6mm / 12.3g |
| Product Size | 48*25*13mm |
| Package Size | 124*67*23mm |
| Product Weight | 17g |
| Package Weight | 71.8g |
Driver Installation
CH9102 ) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. if If the program cannot be downloaded normally (the prompt is overtime or Failed to write to target RAM), you can try to reinstall the device driver.| Driver name | Applicable driver chip | Download link |
|---|---|---|
| CH9102_VCP_SER_Windows | CH9102 | Download |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | Download |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Related Link
Schematic
Examples
Arduino
Model Size
Video
- M5StickC PLUS2 features